Start with the statue you actually have
The PG Studio Ryomen Sukuna statue is a 1/6 scale piece made from resin, PU, and an LED component. Its listed dimensions are H33 * D20 * L20cm estimated, so plan a display area that can accommodate that footprint and height without crowding. The LED is part of the build, which means your care routine should account for both the sculpted surfaces and the lighting element.
Catalog details that shape your display plan
- 1/6 Scale Ryomen Sukuna with LED - Jujutsu Kaisen Resin Statue - PG Studio: 1/6 scale, H33 * D20 * L20cm estimated Use these supplied measurements to check shelf height and depth before placing the statue.

1/6 Scale Ryomen Sukuna with LED - Jujutsu Kaisen Resin Statue - PG Studio - 1/6 Scale Ryomen Sukuna with LED - Jujutsu Kaisen Resin Statue - PG Studio: Resin + PU + LED construction Mixed materials need gentle dusting, and the LED means you should avoid wet cleaning near the light.
- 1/6 Scale Ryomen Sukuna with LED - Jujutsu Kaisen Resin Statue - PG Studio: Purple limited to 128pcs; Red limited to 68pcs Edition size affects how carefully you may want to handle and store the piece.
How to set up the LED safely
The supplied information does not include operating instructions for the LED, so treat these as general handling precautions rather than manufacturer directions. If the LED does not illuminate or you are unsure about power requirements, contact the store at [email protected] before making adjustments.
- Inspect before powering on: Check the statue and LED wiring for visible damage or loose connections before connecting power.
- Place the statue first, then connect: Position the statue on its final stable surface before attaching any power source, so you are not moving a live display.
- Keep the LED dry: Do not spray or wipe cleaning products near the LED or any electrical part. Dust the surrounding resin with a dry method instead.
- Use the LED for display, not constant illumination: The supplied record does not specify duty cycles or bulb life, so switch the LED off when you are not displaying the statue.
Dust care for resin and PU surfaces
Resin and PU collect dust in the same way, but the LED area needs extra caution. The supplied record does not include a cleaning kit or manufacturer-approved products, so keep your routine simple and dry.
- Use a soft, dry brush: A clean makeup brush or soft detailing brush lifts dust from sculpted details without scratching.
- Work from top to bottom: Start at the head and shoulders, then move down so dislodged dust does not settle on already-cleaned areas.
- Avoid water and solvents near the LED: The LED is an electrical component. Keep all liquids away from it and from any wiring.
- Do not use compressed air on delicate parts: The supplied record does not confirm that compressed air is safe for this statue, so stick with gentle brushing.
Choosing a display spot that protects the statue
The listed height of H33cm estimated means you need vertical clearance, and the D20 * L20cm estimated footprint needs a stable base. The supplied record does not include a display case or base, so plan your own stable surface.
- Pick a shelf or cabinet with a back panel: A back panel reduces dust and limits accidental knocks from behind.
- Keep it out of direct sunlight: The supplied record does not confirm UV resistance, so avoid a spot where sun hits the resin for hours each day.
- Leave room around the LED: Do not press the LED against a wall or fabric. Give it open space so heat, if any, can dissipate.
- Secure the surface against wobble: A stable, level surface matters more than a decorative one. Avoid narrow shelves that flex or tip.
What the listing does not confirm
The supplied record does not include LED operating instructions, power specifications, or a care manual. It also does not confirm UV resistance, heat output, or recommended cleaning products. If any of these details matter to your setup, email [email protected] before you buy or power on the statue. The edition sizes and estimated dimensions are supplied, but shipping timing and final production details should be confirmed directly with the store.


